Vacuum pumps with lubrication without recirculation G series - 40-75 mc/h

Vacuum pumps with lubrication without recirculation G series - 40-75 mc/h

Characteristics

Gamavuoto 40 to 75 m3/h lubricated vacuum pumps are characterized by a very simple design, by a strong, compact body and by a simple but efficient air cooling system.

In the “G” series the electric motor is connected to the body of the pump through a flexible connector and this allows the use of different kinds of motors (DC power, ADPE, ATEX, and so on…)

In this version of the pump, the lubricant is in a transparent tank placed at the top and is equipped with a level switch which allows managing the possible lack of oil, which, once used for the normal process lubricant, is accumulated in the tank located below the discharge / silencer of the pump and is no longer put back into circulation, thus preventing any impurities (dust, liquids, etc.) not retained by the main filter during intake from accumulating and causing performance deterioration.

Installation

Connect up to the vacuum circuit. Set up the electrical connections to the motor and check that the pump is rotating in the right direction.

WARNING! If the electrical motor rotates in the wrong direction, the suction unit could be damaged.

Art. Volume aspiratoVacuum flowVak.-Durchs Press. finaleFinal pressure ABSEndddruck VelocitàRpmGeschwindigkeit Potenza motoreMotor powerMotorleistung PesoWeightGewicht A B C D E F G I Viscosità olioOil viscosityViskosität Öl
50 Hz
Mc/h
60 Hz
Mc/h
mbar/ass 50 Hz
g/min
60 Hz
g/min
50 Hz
Kw
60 Hz
Kw
kg
GPOL 40/GLP 40 48 40 1450 1700 1.1 1.3 49 210 350 415 545 185 525 1” 12.5 ISO 100
GPOL 50/GLP 50 60 40 1450 1700 1.5 1.8 55 210 360 415 560 185 525 1" 12.5
GPOL 65/GLP 65 78 40 1450 1700 1.5 1.8 60 210 360 415 580 185 525 1” 12.5
GPOL 80/GLP 80 96 65 1450 1750 2.2 2.6 81 210 365 415 640 185 525 1-1/2" 12.5 ISO 150